3D plastic chassis Peugeot 207 WRC - Avant Slot
Ref: SP601035
ABS Plastic - weight approx. 11 gr - monochassis IN LINE - bag with 1 unit
All 3D chassis manufactured with plastic ABS by Sloting Plus incorporating the advances and improvements that are developed through multiple tests.
All chassis that makes Sloting 3D Plus has the bore of the support of the guide 3.70 mm and can only be equipped guides with similar bushing measure.
The appropriate guides are SP101001, SP101002, SP101003 and SP101004 of Sloting Plus.
To avoid possible manipulations which could damage the support of the guide only recommend using guides with screw ans the same measure. We discourage use the typical "clip" guides.
REMEMBER:
To paste the brass bearings, or the screws to securing it, or the screws to secure the engine or the allen bolt screws to regulate the axle, ALWAYS use contact glue. Never use cyanoacrylate glue unless you want glued forever. The cyanoacrylate adhesive are too strong.
All chassis that makes Sloting 3D Plus has the bore of the support of the guide 3.70 mm and can only be equipped guides with similar bushing measure.
The appropriate guides are SP101001, SP101002, SP101003 and SP101004 of Sloting Plus.
To avoid possible manipulations which could damage the support of the guide only recommend using guides with screw ans the same measure. We discourage use the typical "clip" guides.
REMEMBER:
To paste the brass bearings, or the screws to securing it, or the screws to secure the engine or the allen bolt screws to regulate the axle, ALWAYS use contact glue. Never use cyanoacrylate glue unless you want glued forever. The cyanoacrylate adhesive are too strong.
All IN LINE monochassis Sloting Plus include two brass bushings and four metric screws for proper and secure grip.
